Type Substation Manual De-icing Tool Combination Product Manual
1. Overview
With the continuous advancement of production science and technology, Hebei Jihang Electric Power Appliance Co., Ltd. has developed a Type II type substation based on insulated operating rods based on market demand. A full range of substation manual de-icing tools. The products of Hebei Jihang Electric Power Technology Co., Ltd. have good mechanical properties and stable and reliable insulation, and are very popular among power system users.
2. Installation and use methods
Check whether the complete set of devices and accessories are complete. Tighten the working end nut and other devices.
. Install the insulating rods in order and assemble the entire device vertically from top to bottom in one go. Multi-section combinations must be assembled in order to prevent loosening of joints.
Users must wear insulating gloves, insulating boots, hard hats and other safety protective equipment in electric sites and be supervised by others while working. It is prohibited to operate without any protective measures or in an environment supervised by others.
3. Placement environment
This product is a high-insulation construction tool. It is recommended to place it in a dry and ventilated environment or directly in a safety tool cabinet. For its maintenance, please refer to the maintenance details of the high-voltage switching rod. .
4. Other Matters
Please conduct regular inspections of the insulation parts according to safety tools.
5. Tool details
?
Voltage level
Composition length/number of sections
Combination of tools and their uses
/sections
De-icing hammer (only removes surface floating ice. Steering hook (only) removes ice between the insulator sheds. De-icing ax (only removes ice on the surface of the insulator. De-icing shovel (only) removes surface floating ice and ice. De-icing hoe (only) Only) Check off the long ice on the substation equipment, the ice between the insulator ice umbrella groups and the floating ice on the surface
/section
/section
Note that the actual product shall prevail .The product is in the upgrading period, please keep an eye on our new products from Hebei Jihang Electric Power Technology Co., Ltd.!
Manual de-icing combination tool
The composition of an ice combination tool
It consists of an insulating rod and Composed of various joints.
2. Application of various joints and overall combination of manual combination tools
Ice steering hook
It can effectively remove ice between insulator umbrella groups, regardless of the size of the distance between the umbrella groups. It should be able to break the ice on the surface of the insulator.
Ice hoe
It can remove the ice on the substation equipment, and it can also be used to remove the ice by dipping into the insulator umbrella group, and it can also smash the insulator. The surface is covered with ice.
De-icing hammer
Can knock on the ice-covered surface of insulators at high places, and at the same time push the ice on synthetic insulators away
Ice shovel
Can remove high-place electrical appliances Ice coating and ice shards on the surface of equipment insulators
De-icing ax
It can cut off the ice coating on the surface of insulators at high places, and can also hook to remove long ice strips on the equipment
Contact Qi Shuo
Contact number
Northern Electric Power Special Substation Manual De-icing Tools Jihang Direct Sales